IEC60061-3: 7006-22C-1 E27 Gauge I for Checking Side Contact
Resiliency in Lampholders
For details of gauge II, see sheet 7006-22D.
The conical part and the screw-thread of the gauge shall comply
with the following requirements:
- Surface finish: 0,4 um (see ISO 468 - 1982)
- Hardness (after tempering): rockwell cone 55 min.
The pitch of the scerew thread of the central rod is 1 mm.
The scale shall consist of 50 parts;
each part repressnting an axial movement for the central rod of
0,02 mm.
(1) For the dimensions of the E27 screw thread see sheet 7006-21.
(2) The sharp part of the end of the thread at the underaide shall
be broken with a radius of approx. 0,5 mm.
(3) It must be possible to increase dimension c up to at least 16,2
mm, by screwing down the central rod.
(4) Dimension E is the reference diameter associated with dimenaion
S.
PURPOSE: To check the minimum side contact resiliency of E27 lampholders.
TESTING: The side contact(s) of the lampholder shall be electrically
connected with the gauge as shown in the test-circuit.
With the central rod in upper position, the gauge is screwed in the
lampholder without using undue force.
The gauge in fixed by acrewing down the nut until the play between
holder and gauge has been removed*.
The central rod is then screwed down with a torque of 0,4 Nm.
Under these conditions the indicator lamp shall light.
The central rod shall then be screwed back until its mark has
passed 10 scale parts (= 0,2 mm).
* In case of dubt a torque of 0,4 Nm shall be applied.
Company introduction
HK LEE HING INDUSTRY CO., LIMITED are specialized in manufacturing special, custom built, test and
measuring equipment for products testing as per international norms
and offering calibration services and related information. Our products and services are used by research
& development establishments, test laboratories, defense
establishments, government institutions & manufacturing industries to fulfill the clients' requirements.
Main Products: Go No Go Gauges, IP Tester, Test Probe Kit, Impact
Test Equipment, Test Probes, Spring Hammer, IEC 61032 Test Finger,
AC Hipot Tester, IEC Test Probe, UL Test Probe, Material
Flammability Tester, IP Code Tester, Impact Test Apparatus,
Security Testing Machine, Plugs and Socket Outlet Gauge, Lamp Cap
Gauge Tester, Lampholders Gauge Tester, Plug & Socket Tester,
Electrical Safety Tester, LED Test Instruments, Environmental Test
Equipment, Instrument Accessories, Weighing Sensor and More.
If you require equipment to test products such as home appliances,
electrical accessories like switches, sockets, connectors, etc.
industrial & road lighting luminaires, automobile lighting systems or related categories, we can provide
the solutions you need.
We would appreciate your comments on the layout design,
presentation or other aspects of our website.
Website: http://www.china-gauges.com
Contact information
Contacts: Nina She
E-mail: sales@china-gauges.com
TEL: +86-755-33168386
FAX: +86-755-61605199
Phone: +86-15919975191
SKYPE: nina.she@outlook.com
Address: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China
ZIP: 518102
Website: http://www.china-gauges.com
